AR-15 PMAG Docking Wall Storage Rack
Dock Your AR-15 to Display on a Shelf
Stand your AR-15 upright on any flat surface with the PMAG Dock Mount. Designed to slide onto the baseplate of a Gen M2 or M3 PMAG, it lets you balance your rifle securely on a desk, bench, or shelf. For added stability, you can also screw it down through the built-in mounting holes.
Perfect for clean displays, quick-access setups, or keeping your rifle ready without a wall mount. Built tough in the USA for serious shooters who like their gear organized and within reach.
Spartan Mounts delivers innovative, American-made storage solutions for every setup.
Most AR-15s will self-balance. Mounting screws are provided for a more secure dock.
In stock! Ships in 1-3 business days.
Free Shipping over $59
Free 30-day returns
Lifetime Warranty
Over 280,000 Sold
AR-15 PMAG Docking Wall Storage Rack Specifications
| Also Compatible With | Gen2 and Gen3 5.56 PMAGs |
|---|---|
| Does NOT Fit | Other AR Magazines |
| SKU | SM-AR15-Dock-1 |
|---|---|
| UPC | 676525008069 |
| Latches Into Mag Release Most rifles latch into the mag release. Most pistols do not latch into the mag release due to multiple grip length options on most pistol models. | No |
| Includes Hole for Cable Lock If "Yes", this mount contains a 0.32" hole running up through the body of the mount, allowing a standard cable lock of the proper length to be installed through the mount, receiver, and out the ejection port. | No |
| Can Be Mounted Vertically If "Yes", this mount will work for both horizontal and vertical mounting. If "No", completely vertical mounting is not recommended, but mounting at an angle up to 45 degrees should be fine. Please refer to the Install Guide. | No |
| Slatwall Hardware Type Hardware sold separately: "Slatwall Hardware Kit". | Not Compatible |
| Rated Load Design rating for the mount itself when it is screwed into a wood stud or a SpartanGrid panel. Drywall anchors hold less: 25 lb with two anchors in the top row of holes, 35 lb with three, or the rating shown, whichever is lower. Lower holes add stability but do not raise these limits. For anything heavier, use a stud or SpartanGrid. | 45 lb |
| Height x Width x Depth [in] Total height, width, and depth of the mount itself. This does not include the room needed to lift off of the mount. | 1.83 x 3.54 x 3.74 |
|---|---|
| Hole Spacing [in] The distance between mounting holes. For mounts with 3 holes (such as the AR-15), the hole spacing listed is for standard horizontal mounting using the top two holes. | 2.00 |
Disclaimer
Before installing, please read our Safety and Installation instructions.
This mount does not enhance or modify any firearm’s functionality. It is intended solely for display and organizational purposes, locking or latching securely to help increase safety by reducing unauthorized or accidental access. No components or instructions offered by Spartan Mounts enable the discharge of a projectile, nor do we supply any parts essential to a firearm’s firing mechanism. We do not sell or distribute any items that could be misused to cause harm.More than a mount. Your setup, done right
Secure storage meets fast access. Check out these collections to keep your setup organized, visible, and ready—so you’re not searching when it matters.
Free 30-day returns
Lifetime Warranty
Common Product Questions
What does product orientation mean?
Our labels for "Left" and "Right" refer to the direction that the barrel of your gun will point after it is mounted horizontally on the wall. This allows for more diversity when designing your setup.
Do the Pistol Mounts lock into the mag release?
Most pistol models have multiple grip and magazine lengths. This means that the mag latch will be in different locations for each pistol. We intentionally kept a non-latching design for our pistol mounts to ensure the most compatibility between models.
Can I request a mount that Spartan Mounts doesn't have yet?
Of course! We have an ongoing "Future Production List" that we pull from every other week to make new mounts! If you have a great idea for our next mount, email us and we'll add it to the list! We will also make sure to email you as soon as it releases, so you won't miss out.
Can I mount a ammo-tube style shotgun while it's loaded?
Yes! Our design uses the ammo tube spring to hold the mount into the bottom of the lower receiver. Depending on the length of your ammo tube, you may or may not need to remove one shell to allow the spring to compress and engage with your mount. Do Not Mount a Chambered Weapon. Please review our safety page for mounting a loaded weapon.